BICYCLE AIR PUMPS & TIRE PRESSURE
Most recumbent tires are high pressure tires … up around 100 psi. If you don’t have an air compressor at home or in your motor vehicle I strongly recommend purchasing a floor type bicycle air pump … one designed to pump high pressure … preferably 140 or 160 psi. That way when you pump up a 100 psi tire you aren’t maxxing out the pump to accomplish it … or maxxing yourself out using it. 🙂
In fact, I suggest getting one of these pumps even if you do have an air compressor available to use as they are quite handy and practical.
Most good quality pumps nowadays have a built in guage making it very handy. I suggest checking the accuracy of the guage initially and from time to time to be sure you are getting the right pressure in the tires.
Here are a couple of examples of pumps available.
Blackburn air tower 3 bike floor pump
Park Tools PFP-4 Professional Mechanic Floor Pump
They can be purchased at your local bike shop. I want to emphasize that it is best to buy a good quality pump and not settle for some inferior pump at a lower cost. I don’t think you would regret paying more for a quality pump. I would also suggest that you talk to a local bike shop mechanic to get their recommedation as to what pump to buy. You could also research them online to get customer feedback.
I am not making any recommendations as to what pump to buy. I am only showing these two as examples of what is available. There are lots of different ones out there. The first pump I have pictured above is a Blackburn Air Tower 3 Bike Floor Pump rated at 160 psi. To the best of my knowledge it is a good quality pump.
The second pump I have pictured above is a ParkTool brand which normally they make pretty good quality stuff. However, the customer reviews of this pump are not all that impressive. That is surprising.
Most pumps nowadays have a dual head on them so that either Presta or Schrader valves are accommodated.
The pump I have is a Pedros Domestique air pump. It is a good pump, but I know that there are better ones available.
In case you didn’t know it an innertube loses air on a continual basis so it is necessary to inflate them from time to time. That’s right … air leaks right thru the rubber so they are constantly losing pressure. The higher the pressure the more they leak down. It is important to keep your tires inflated to the correct pressure. You will get better wear, mileage, handling, and performance out of your tires as well as make it easier to pedal along since low air pressure equates to more rolling resistance.
It is also important that you never over inflate your tires beyond what they are designed for. Doing so can result in destroying the tire and causing a major tire failure which could be disaterous at worst and leave you stranded at best.
I once put about 10 psi more in a knobby tire I used for winter riding. About 10 miles from home I noticed something which wasn’t right in the ride … a pronounced thump of sorts. I stopped and got off to look. My rear tire was literally coming apart … separating from too much pressure in it. Fortunately I was only about a half of a mile or so from a local bike shop so I made it over there and got a new tire. The tire that had just gone bad would have lasted me for several years more if I had not over inflated it.
Yes, proper tire inflation is quite important … especially if we all want to …
KEEP ON TRIKIN’
A FREE GIFT awaits you!