This not only looks very untidy and unprofessional it is downright dangerous. Yet I see it all the time … brake cables, shifting cables, wires and who knows what else … hanging down almost touching the ground. I mean that is “an accident waiting to happen”. All it takes is for one or more of these to snag on something as the trike is in motion and “wow” … bad news for sure. Not only can serious damage result to the cables (wires or what have you), what they are attached to, and who knows what else, but it could cause a wreck and maybe even launch the rider forward out of the seat.
Such stuff hanging down should be dealt with. I use plastic cable ties to hold cables and wires up. Of course, sometimes the cables are just too long to begin with in which case they should be shortened. I caution you however to make sure that you don’t shorten a cable too much so that it is not long enough to facilitate turning the wheels all the way both directions. Also if the trike folds the cables must be long enough to allow that. In raising the cables and wires up and securing them using plastic cable ties (or whatever) the same concerns exist so make sure what you are doing is not going to cause problems. There should not be any problem finding a way to get these low hanging hazards eliminated. I have secured them to the frame, another cable, a seat strap, etc. I have rerouted cables and wires so that they are kept up above the frame. I have routed them inside the mesh seat pad on the bottom side of seat (sandwiched in between). As the saying goes … “where there is a will there is a way”. Just make sure nothing binds or effects the working on the cables in any way. That is the lowdown on these lowdown hazards.
Avoiding such unpleasant and unwelcome surprises while riding should be a priority. Afterall, we all want to …
KEEP ON TRIKIN’